Monday 16 November 2015

Alumininum Putty

No comments  

Alumininum Putty -Repair of Aluminum parts/castings - SavesPast AP

 21111
 New
Repair of Aluminium parts/castings
A two component paste, based on a aluminium powder filled epoxy system. The non-rusting, non magnetic dependable inert putty extensively used for fairing, repair or patching of aluminium castings and equipment where aluminum finish is desired.



*Condition Apply

Buy More ! Get Application Free !

MOQ - Minimum Gross PO Value should be at par or more than INR ₹ 100000/-
CUSTOMER SCOPE OF ARRANGEMENT
  1. Scaffolding Arrangement
  2. Shelter for Material Security (with lock and key)
  3. Accommodation for Technicians/ Applicators (Bachelor/Dormitory/Labor)
  4. Food Arrangement/Subsidized rates at Canteen
  5. Water / Electricity.

MORE INFO:-

SavesPast AP - Repair of Aluminium parts/castings



Description:
A two component paste, based on a aluminium powder filled epoxy system. The non-rusting, non magnetic dependable inert putty extensively used for fairing, repair or patching of aluminium castings and equipment where aluminum finish is desired.


Product Features:
  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance Good resistance to abrasion, friction reduction and hence ideal for turn-around time.
  • The product may be applied to any unlimited thickness onto horizontal or vertical surfaces
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining Resistant to chemicals and most acids, bases, solvents, and alkalis.
  • It can be easily Can be machined, drilled, tapped or painted
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC’s
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost.

Under Water Repair Putty

No comments  

Under Water Repair Putty for Chronically Wet/Damp Environments - Supply & Apply

 No WO-21105
 New
Under water repair putty for chronically wet/damp environments
Under Water Putty - Zero-Down-Time -  UWP - Chronically wet/damp environments@5mm Thickness

*Condition Apply

MORE INFO:-

SavesPast SSP - Repair of Stainless Steel parts/castings and food processing equipments


Description:

The moisture surface tolerant epoxy putty makes effective repairs to metal, concrete, wood surfaces in wet and damp environments. The product is used extensively for chronically underwater repairs, underwater patching, filling cracks, leaks, holes and the applications where dampness is present such as boat hulls, tanks, pipelines, valves, pumps, concrete vessels etc. The putty is unaffected by chlorinated or salt water and is ideal for plumbing, irrigation and marine where applications are underwater.
Product Features:
  • Prevent environmental damage caused by leakages
  • Prevents profit decline due to leakages of oil and gas which is very expensive
  • Accommodates cyclic thermal expansion and contraction
  • Requires no heat
  • Fast, cost effective and durable
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No VOC’s and No Shrinkage.
Typical Applications:
  • Pipeline leakage repair
  • Water heater&drain leakages
  • Water tank leakages
  • Wet&slowly leaking surface
  • Sewage installations repair works
  • dampness & wetness applications
  • Certified for potable water applications.

Express Titanium Putty

No comments  

Express Titanium Putty Rapid Setting Putty for Sealing Active Leakages Supply & Apply

 No WO-21104
 New
Express Titanium Putty - Supply & Apply
Express Titanium Putty - Zero- Down-Time - ETP - Rapid Setting putty for sealing active leakages@5mm Thickness


*Condition Apply

MORE INFO:-

Zero-Down-Time ETP - Rapid Setting putty for sealing active leakages


Description:
A rapidly solidifying repair system containing Resin and quick setting Hardener which after mixing sets within 5 minutes. The fast curing putty is oil surface tolerant and moisture surface tolerant. In general the metal surfaces are susceptible to the leakages due to corrosion or faulty weld or porous structures.
Product Features:
  • Prevent environmental damage caused by leakages
  • Prevents profit decline due to leakages of oil and gas which is very expensive
  • Accommodates cyclic thermal expansion and contraction
  • Requires no heat
  • Fast, cost effective and durable
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No VOC’s and No Shrinkage.
Typical Applications:
  • Pipeline leakage repair
  • Water heater&drain leakages
  • Water tank leakages
  • Wet&slowly leaking surface
  • Sewage installations repair works
  • dampness & wetness applications
  • Certified for potable water applications
https://e-industrialmaintenance.net/express-titanium-putty-rapid-setting-putty-for-sealing-active-leakages-supply-apply.html

Ceramic Carbie Putty

No comments  

Ceramic Carbie Putty - Supply & Apply

 No WO-21106
 New
Ceramic Carbide Putty against fine particle abrasion
Ceramic Carbie Putty against fine particle abrasion - Ceramic Carbide Putty  - SavesPast CCP @5mm Thickness

*Condition Apply

MORE INFO:-

SavesPast CCP - Ceramic Carbide Putty against fine particle abrasion


Description:
2 pack non-sagging, trowel applied epoxy putty is extensively used for repairing and protecting surfaces against abrasive attack. SavesPast CCP is containing maximum load of high alumina ceramic beads and silicon carbide designed to give maximum abrasion resistance. The product offers maximum performance against entrained particulate abrasion, constant vibration, and wearing surface abrasion.
Product Features:
  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance Good resistance to abrasion, friction reduction and hence ideal for turn-around time.
  • The product may be applied to any unlimited thickness onto horizontal or vertical surfaces
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining Resistant to chemicals and most acids, bases, solvents, and alkalis.
  • It can be easily Can be machined, drilled, tapped or painted
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC’s
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost.
Typical Applications:
  • Agitator blades Vessels
  • Chutes Conveyor belting
  • Rollers Screens
  • Fans lining
  • Cyclone and separator bodies
  • Dust collectors and exhausters
  • Fan blades and housings
  • Repairing worn pump housings
  • Preventing cavitation to condenser water boxes
  • Rebuilding pump impellers
  • Rebuilding condenser tube sheets area
  • Compressor & oil coolers
  • Ash & slurry pump
  • Screw conveyors
  • Transmission pan covers
  • Oil pan covers
  • Circulating water equipment
  • Bow Thrusters
  • T Pieces
  • Coal Pulveriser
  • Ash handling pipes and valves
  • Seperators
  • Vibrating feeders
  • Screw feeders

Rebuilding Putty

No comments  

Rebuilding Putty for tough wear and abrasion resistance - Supply & Apply

 No WO-21103
 New
Rebuilding putty for tough wear and abrasion resistance
Rebuilding putty for tough wear and abrasion resistance - SavesPast CP - Ceramic Putty @5mm Thickness



*Condition Apply

MORE INFO:-

SavesPast CP - Rebuilding putty for tough wear and abrasion resistance


Description:

A two component paste general purpose ceramic-filled epoxy system .The ceramic putty is used to repair high wear areas against sliding abrasion / erosion of processing equipment’s , interfacing metallic, low-friction surfaces and extends wear life. It is ideally suited to be over coated with XtraLife CEC- 21202 (Ceramic Brushable) to ensure long lasting performance.
Product Features:
  • Fast,cost effective and durable
  • High compressive strength and extreme chemical resistance Good resistance to abrasion, friction reduction and hence ideal for turn-around time.
  • The product may be applied to any unlimited thickness onto horizontal or vertical surfaces
  • Efficient alternate method of repair where welding or brazing would be undesirable or impossible
  • Can Repair Intricate shape or forms/thin sections, difficult to weld metals
  • No equipment/Power supply needed
  • Unlimited cycle of repairs
  • Less Labor costs - Avoid assembly/disassembly, Pre Machining/Post Machining Resistant to chemicals and most acids, bases, solvents, and alkalis.
  • It can be easily Can be machined, drilled, tapped or painted
  • Superior adhesion – forms a solid bond to steel, cast iron,
  • Stainless steel, concrete, and clean and abraded bronze, copper, and aluminum.
  • Eliminates costly wear part inventory
  • No shrinkage, expansion or distortion
  • Excellent electrical insulation characteristics
  • Can do repairs at In-situ repair, In-Plant, Workshops, Remote areas
  • No VOC’s
  • Routine Maintenance and Unexpected Maintenance
  • Repair cost at fraction of replacement cost.
Typical Applications:
  • Agitator blades Vessels
  • Chutes Conveyor belting
  • Rollers Screens
  • Fans lining
  • Cyclone and separator bodies
  • Dust collectors and exhausters
  • Fan blades and housings
  • Repairing worn pump housings
  • Preventing cavitation to condenser water boxes
  • Rebuilding pump impellers
  • Rebuilding condenser tube sheets area
  • Compressor & oil coolers
  • Ash & slurry pump
  • Screw conveyors
  • Transmission pan covers
  • Oil pan covers
  • Circulating water equipment
  • Bow Thrusters
  • T Pieces
  • Coal Pulveriser
  • Ash handling pipes and valves
  • Seperators
  • Vibrating feeders
  • Screw feeders
https://e-industrialmaintenance.net/rebuilding-putty-for-tough-wear-and-abrasion-resistance-supply-apply.html